Share your love

Lowered Foot Pegs: The Most Overlooked Upgrade for Your Adventure Bike
TrTec lowered foot pegs sit 20 mm lower, longer and wider than standard pegs. Why they ease your knees on long rides, which bikes they fit and the price.

Did you know that not all riders are the same height? Motorcycles leave the factory set up for an average rider, and if you are tall, or of average height with long legs, your knees pay for it on every long ride. Flying Brick reckons a set of lowered foot pegs is the most overlooked upgrade you can make to your bike.
Most riders spend their accessory money on luggage, lights, crash bars and exhausts long before they think about where their feet go. Yet the foot pegs carry your weight every time you stand up, and they set the angle of your knees for every hour you sit. Get them wrong and even a comfortable seat and a good screen will not save you from stiff knees and aching hips at the end of the day.
The TrTec Lowered Foot Pegs, sold by Flying Brick Motorcycle Accessories in Cape Town, are a simple fix. They are a great upgrade that will enhance both your bike and the riding experience, and they are available for more than thirty adventure, dual-sport and off-road models.

Why peg height matters on a long ride
Every motorcycle has what riders call a rider triangle: the seat, the handlebars and the foot pegs. Where those three points sit decides how your body is folded on the bike. Raise the seat or lower the pegs and your legs open up. Lower the seat or raise the pegs and your knees bend more tightly.
For a short ride it hardly matters. On a full day in the saddle, a tight knee bend is what leaves you hobbling at the fuel stop, shifting around on the seat and stretching your legs on the pegs at 120 km/h. Tall riders feel it first, but anyone with long legs for their height knows the feeling.
That is why Flying Brick particularly recommends lowered pegs for adventure motorcyclists. They are the riders who often spend many hours in the seat, on trips that run for days, and small discomforts add up over a long trip.
What 20 mm lower does for you
The TrTec pegs sit 20 mm lower than the standard OEM foot pegs. That allows the bend of your knee to be less tight, which increases your general comfort, especially on longer rides. It does not sound like much, but the difference is easy to see side by side.


If 20 mm is not enough, Flying Brick can supply custom pegs that sit 30 mm lower, on request only. For most riders who simply want a more relaxed knee angle, the standard 20 mm drop is the place to start.
Lowered foot pegs are probably one of the most overlooked upgrades you can make to your bike.
Flying Brick
Longer, wider and made for standing
The TrTec pegs are not only lowered; they are also longer and wider. This means that they provide a much larger platform for your foot to rest on while sitting and while standing and riding, which further enhances your comfort.
Standing is where a bigger peg really earns its keep. Off-road, you steer and balance an adventure bike through your feet as much as your hands, pressing on one peg or the other to turn and letting the bike move underneath you. A narrow peg digs into the arch of your boot and tires your feet. A wide one spreads the load and gives you a firmer base to push from.
For larger and heavier bikes, the width of the foot pegs helps enhance your control, and because the pegs are lower, it may be easier for you to reach your foot controls.


Grip when it is wet, muddy or both
The design incorporates spike protrusions, which assist with grip and stability in wet and slippery conditions. That matters most when you least expect it: a wet river crossing, a muddy farm road after the first summer storm, or a dewy morning when your boot soles are still slick.
Lastly, the open design of the foot pegs makes it easier to shed dirt, mud and debris. A solid peg packs up with mud until your boot is resting on a slippery lump of clay. An open peg lets the mud fall through, so the spikes keep biting into your sole.
Fitting them and setting up your controls
Each set is made for a specific model, so the pegs fit in place of the standard ones on your bike’s own peg mounts. Once they are on, take a few minutes to check your gear lever and rear brake pedal. With your feet sitting lower, both should fall naturally under the toe of your boot, without you having to lift or twist your foot to reach them. Most bikes let you adjust the gear lever and brake pedal height, and it is worth getting right before your first long ride.
It is also worth knowing the one trade-off. Lowering the pegs brings them 20 mm closer to the ground, so you give up the same amount of ground clearance under the pegs. On a gravel road or a tour it makes no difference, but on rocky, rutted tracks it is worth keeping in mind.
Which bikes do TrTec lowered foot pegs fit?
TrTec lowered foot pegs are available for the following models:
| Make | Models |
|---|---|
| BMW | F450GS, F650GS, F750GS, F800GS and F800GS Adventure, F850GS and F850GS Adventure, F900GS and F900GS Adventure, G310GS, R nineT, R1200GS and R1200GS Adventure (air-cooled and liquid-cooled), R1300GS and R1300GS Adventure |
| CFMOTO | 450MT and 800MT |
| Ducati | DesertX |
| Honda | Africa Twin XRV750, CRF1000 and CRF1100 Africa Twin, CB500X, NX500, XL750 Transalp, XR650, CRF250, CRF300 and CRF450 series |
| Husqvarna | Norden 901, and the motocross bikes |
| KTM | 390 Adventure, the new 390 Adventure R, all the other Adventure models, and the motocross bikes |
| Royal Enfield | Himalayan 450 |
| Suzuki | DR650, V-Strom 250, V-Strom 800DE and V-Strom 1050DE |
| Triumph | Tiger 800 and Tiger 900 |
| Yamaha | Super Tenere XT1200Z, Tenere 700, WR450, XT660R and XT660Z |
The pegs for the KTM and Husqvarna motocross and enduro bikes from 2017 sit 15 mm lower rather than 20 mm. If your bike is not on the list, ask Flying Brick, who can tell you what is available for it.


Short or tall: the seat is the other half
Foot pegs are only one corner of the rider triangle, and Flying Brick can help with the seat too. For shorter riders, they can shave the seat so that the rider can more easily reach the ground, which makes a big difference when you are holding up a tall, loaded adventure bike at a stop street or on a loose, sloping shoulder.
For taller riders, they can add to the seat for an even more comfortable sitting position. Combined with lowered pegs, a taller seat opens your knees up further still, so the bike finally fits the rider rather than the average rider it was built for.
Price and where to buy
At the time of writing, TrTec lowered foot pegs cost R1,695 for every model listed. They are available from the Flying Brick store in Paarden Eiland, Cape Town, and online in their lowered foot pegs range, with delivery nationally and worldwide. Stock varies by model, so check before you travel to collect.
Visit the Flying Brick store at 8 Shropshire Street, Paarden Eiland, Cape Town, call the shop on 021 510 6455, or call or WhatsApp 067 278 1893.
Getting comfortable is one part of a long ride. Being self-sufficient is the other, and Flying Brick has also written about carrying spare fuel with Desert Fox fuel cells and fixing a puncture with BeadMaster bead breakers.
Written by Flying Brick Motorcycle Accessories, the adventure motorcycle accessory store in Paarden Eiland, Cape Town. Prices from Flying Brick’s online store, November 2026. Prices may change.
Quick Answers
How much lower are TrTec lowered foot pegs?
TrTec lowered foot pegs sit 20 mm lower than the standard OEM pegs. Custom pegs 30 mm lower are available from Flying Brick on request, and the version for KTM and Husqvarna motocross and enduro bikes from 2017 sits 15 mm lower.
Who should fit lowered foot pegs?
Tall riders, and riders of average height with long legs, gain the most, because lower pegs open up a tight knee bend. Flying Brick particularly recommends them for adventure riders, who often spend many hours in the seat on long trips.
Do lowered foot pegs reduce ground clearance?
Yes, by the same amount as the drop, so 20 mm for the standard TrTec pegs. On gravel roads and tours it makes no real difference, but it is worth keeping in mind on rocky, rutted tracks.
How much do lowered foot pegs cost in South Africa?
TrTec lowered foot pegs cost R1,695 from Flying Brick Motorcycle Accessories in Cape Town in November 2026, for every model they fit, with delivery nationally and worldwide.








